MK

DE

IT

LOW CARBON STEEL SHOT

STEEL SHOT - PRODUCT APPLICATION

Zeleznik has 40 years of experience in producing low-carbon steel shots. The Steel shots have a carbon content of 0.12 – 0.17% by weight, It has a bainite structure and therefore it possesses optimum properties in terms of toughness and hardness. The low percentage of carbon ads 30% higher durability of our steel shot than the high carbon steel shots (Ervin test - K100 durability). The hardness of the grains is defined by the carbon level.

In the production process of our low-carbon steel shot granulations is followed by thermal process of drying, which has a beneficial tempering effect. The grain is free from cracks. Quality control is permanent by keeping samples of every delivering of steel shots for further laboratory examination.

 

The desired operating mixture (the right balance between cleaning performance and good coverage) can be achieved by combining several different grain size ranges.

 

CHEMICAL STRUCTURE:

C = approx. 0,10 - 0,17 %

Si = approx. 0,10 - 0,25 %

Mn = approx. 1,00%

P = max. 0,035%

S = max. 0,035%

 

DURABILITY: ERVIN TEST K100 = 3000 - 3500 cycles

HARDNESS: HRc = 40 - 45; HV = 400 - 480

SPECIFIC WEIGHT: cca 7,5 kg/dm3

FILLING WEIGHT: cca 4,4 kg/dm3

MICROSTRUCTURE: Bainitic

1. FOUNDRIES

Steel shot is used for blast cleaning - removing of contaminant ( oxide layer and sand ).

The size of the steel shot it depends on the size of steel casting.

grain iron: S230, S280, S330, S390, S460, S550, S660, S780

steel cast: S280, S330, S390, S460, S550, S660, S780, S930

nodular iron: S170, S230, S280, S330, S390, S460, S550, S660

colored metal (Al, Cu alloy): S170, S230

 

2. STEEL MILLS, FORGING SHOPS, ROLLING MILLS

Is used for: removing rust, decreasing or achieving roughness effect for good connection between paint and surface.

halfproducts: S230, S280, S330, S390, S460, S550, S660

steel construction: S170, S230, S280, S330

Sheet metal: S110

Profils: S170, S230, S280, S330

Tubes: S170, S230

Railway tracks: S170, S230

 

3. POLISHING - tools, big parts, sheets of alloyed steels: S110, S170

 

4. SHOT PEENING - increasing strength and fatigue resistance.

Flat and spiral springs, rollers, screws, connectors: S170, S230, S280

STEEL CASTINGS

1. MINING, CRUSHING AND CEMENT INDUSTRY

2. CONSTRUCTION AND AGRICULTURAL MACHINES

3. POWER PLANT

4. MACHINERY PARTS AND TOOLS

©2014 zeleznik.com.mk     |     All rights reserved.